Outils pour utilisateurs

Outils du site


issue155:q_r

Ceci est une ancienne révision du document !


Welcome back to another edition of Questions and Answers! In this section, we will endeavour to answer your Ubuntu questions. Be sure to add details of the version of your operating system and your hardware. I will try to remove any personally identifiable strings from questions, but it is best not to include things like serial numbers, UUID’s or IP addresses. If your question does not appear immediately, it is just because there is such a lot, and I do them ‘first-come-first-served’. Back in the day, we didn’t have Sean Connery… oh wait, we did. What we didn’t have was high speed internet, so, when this new-fangled technology rolled around, there were some people who saw an opportunity to use it for good. They installed a 9600baud modem in a PC to be able to do accounting and stock-take in one location. The PC was wrapped in metal, with a keypad and tiny green display. It was sold as a till and accounting system. However, the units were installed in places where the humans were an issue, so the engineers came up with a plan to change the pin layouts of the phone jacks, and the cables for the modems. Because lightning on the telephone lines damaged the modems, they needed someone to go replace them, if faulty. Enter yours truly. Arriving at these stores, usually in high streets, carrying tools and replacement parts, after pushing through throngs of people, I would often find no fault. Turns out, the employees wanted to use the phone jacks to make free phone calls. Failing to do so, the pins not being standard, they would leave it unplugged, hoping a technician would arrive and tell them how to make free phone calls. What I am trying to illustrate here is: there is always the human factor. Have you checked the human factor before posting on a forum or chat?

Bienvenue dans une autre édition de Questions et Réponses ! Dans cette rubrique, nous essayerons de répondre à vos questions sur Ubuntu. Assurez-vous d'ajouter les détails de la version de votre système d'exploitation et votrre matériel. J'essaerai d'enlever toutes chaînes qui pourraient vous identifier personnellement des questions, mais il vaut miexu ne pas inclure des choses comme des numéros de série, UUID ou adresses IP. Si votre question n'apparaît pas tout de suite, c'est tout simplement parce qu'il y en a beaucoup et j'y réponds sur la base de « premier arrivé, premier servi ».

Autrefois, nous n'avions pas Sean Connery… attendez, si. Ce que l'on n'avait pas était l'Internet à haut débit ; aussi, quand cette nouvelle technologie est entrée en scène, il y avait des personnes qui voyaient une occasion pour l'utiliser pour le bien. Ils ont installé un modem à 9600 baud sur un PC pour pouvoir faire de la comptabilité et le bilan dans une seule localisation. L'ordi était habillé en métal, avec un pavé numérique et un tout petit affichage vert. Il était vendu comme un système de caisse et de comptabilité. Cependant, les unités furent installés dans des endroits où les êtres humains étaient un problème et les ingénieurs ont décidé de changer la disposition des broches dans les prises téléphoniques et les câbles pour les modems. Puisque la foudre sur les lignes téléphoniques endommageait les modems, ils avaient besoin d'une personne qui irait les remplacer, s'ils étaient défectueux. C'est là où le soussigné est arrivé. Quand j'entrais dans ces magasins, généralement en haut d'une rue en côte, portant des outils et des pièces de rechange, après m'être frayé un chemin parmi une foule, je découvrerais souvent qu'il n'y avait pas de problème. Il s'avère que les employés voulaient utiliser les prises téléphoniques pour faire des appels gratuits. Puisqu'ils échouaient, car les broches n'étaient pas standards, ils laisseraient la prise débranchée, dans l'espoir qu'un technicien arriverait et leur dirait comment faire des appels gratuits. Ce que j'essaie de démontrer ici, c'est que le facteur humain est toujours présent. Est-ce que vous vérifiez le facteur humain avant de poster quelque chose sur un forum ou un irc ?

Q: I have Xubuntu. I have been thinking of going to Disco Dingo for fractional scaling, e.g 1.25x. Deepin looks like it supports it, and maybe KDE too. Can I backport it to 18.04? I have a 50 inch TV that I have connected, but some things are just too small to see. I wear spectacles already. My media PC is actually an old laptop connected to my TV via VGA port, not HDMI. A: I understand the part of not wanting to reload in 9 months. If you use a laptop, do you have an external mouse and keyboard attached to control it with? If so, why not use the mouse wheel and left ALT to zoom in when having to read or type, and zoom out again to watch your movie? It will zoom to your pointer. You can make your pointer bigger in settings > mouse > themes > cursor size. Q: How do I do wa -la? I have man, but no entry. I posted the question to stack exchange and the answer was to sudo Nautilus and navigate wa -la. Did he mean ls -la? I would like to retrieve file from a standard account I can’t log into. I need to type some commands in terminal or go through the files app to access the file. A: I have never heard of wa? It could be ls – la. I would suggest the find command. EDIT: I think I found your post ! What the guy was trying to say was VOILA! (wa-la) :D

Q : J'ai Xubuntu. J'envisage de changer pour Disco Dingo pour la mise à l'échelle fractionnaire, par exemple 1,25x. Deepin semble la prendre en charge et peut-être KDE aussi. Puis-je le rétroporter à la 18.04 ? J'ai un téléviseur de 50 pouces que j'ai connecté, mais certaines choses sont tout simplement trop petites pour être visibles. Je porte déjà des lunettes. Mon PC média est en fait un vieux portable connecté au téléviseur via un port VGA, pas HDMI.

R : Je comprends votre désir de ne pas devoir réinstaller dans neuf mois. Si vous utilisez un portable, y a-t-il une souris et un clavier externes avec lesquels le contrôler ? Si c'est le cas, vous pourriez utiliser la roue de la souris et la touche ALT de gauche pour zoomer en avant quand vous devrez lire ou écrire et faire un zoom en arrière pour pouvoir regarder un film. Il zoomera vers le pointeur et vous pouvez rendre le pointeur plus grands dans paramètres > souris > thèmes > taille du curseur.

Q : Comment faire wa _la ? J'ai les pages man, mais il n'y a rien. J'ai posté la question sur le réseau de questions et réponses Stack exchange et la réponse était de faire sudo Nautilus puis naviguer vers wa -la. Voulait-elle dire ls - la ? J'aimerais récupérer un fichier d'un compte standard auquel je ne peux pas me connecter. Je dois saisir des commandes dans un terminal ou utiliser l'appli des fichiers pour accéder au fichier.

R : Je n'ai jamais entendu parler de wa ? Cela pourrait être ls -la. Je suggérerais la commande find.

ÉDITEUR : Je pense avoir trouver votre message ! Ce que le gars essayait de dire était VOILÀ ! (wa-la) :D

Q: I've installed Ubuntu 19.04 on my Thinkpad. But I can't use my touchpad? Ubuntu can see it, so it should work. I am using an external mouse atm, so it is not a big deal. Can you help me? This is my output: $ xinput list Virtual core pointer id=2 [master pointer (3)] Virtual core XTEST pointer id=4 [slave pointer (2)] Microsoft Microsoft® Nano Transceiver v2.0 id=10 [slave pointer (2)] Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave pointer (2)] ETPS/2 Elantech Touchpad id=15 [slave pointer (2)] A: Two questions: is it enabled in your settings panel? Do you perhaps dual-boot and maybe use software on the windows side to turn it off? (I am assuming you have tried the shortcut keys on your keyboard to try and turn it on again). Q: Which Office package is best? I have heard a lot of hype surrounding WPS Office. A: Best is subjective, but I am glad for this question. You see last week I lost the WHOLE Q&A section due to an issue with OnlyOffice, so I am back to LibreOffice again. For bog standard letters, any of them will do. I will address WPS Office first as it was your question. WPS Office has a free and paid option. The free option is slightly crippled (like OnlyOffice too). WPS office is not open-source. Though the program is a pleasure to use, it phones home all the time, which is the part I do not like. If you install it offline and use it offline, it is quite fine. For features such as versioning, you cannot beat the price of LibreOffice (though it may look outdated.)

Q : J'ai installé Ubuntu 19.04 sur mon Thinkpad, mais je ne peux pas utiliser le pavé tactile. Ubuntu le voit et cela devrait donc fonctionner. J'utilise une souris externe ; aussi cela ne me gène pas trop. pouvez-vous m'aider ? Voici la sortie :

$ xinput list Virtual core pointer id=2 [master pointer (3)] Virtual core XTEST pointer id=4 [slave pointer (2)] Microsoft Microsoft® Nano Transceiver v2.0 id=10 [slave pointer (2)] Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave pointer (2)] ETPS/2 Elantech Touchpad id=15 [slave pointer (2)]

R : Deux questions : est-ce que c'est activé dans le panneau des paramètres ? Êtes-vous peut-être en double amorçage et utilisez-vous alors un logiciel côté Windows pour le désactivé ? (Je suppose que vous avez essayé les raccourcis clavier pour essayer de l'activer à nouveau).

Q : Quelle suite bureautique est la meilleure ? J'ai entendu pas mal de battage médiatique autour de WPS Pffoce.

R : « Meilleure » est subjectif, mais cette question me plaît. La semaine dernière, j'ai perdu TOUTE la section Q. ET R. à cause d'un problème d'OnlyOffice, et c'est ainsi que j'ai repris LibreOffice à nouveau. Pour des lettres normalisées, n'importe laquelle fera l'affaire. Je parlerai de WPS en premier, car c'était votre question. WPS a deux options : l'une gratuite, l'autre payante. L'option gratuite est légèrement réduite (comme c'est le cas d'OnlyOffice aussi). WPS Office n'est pas Open Source. Bien que le programme soit très agréable à utiliser, il invoque la page Web sans cesse, ce que je n'aime pas. Mais si vous l'installez et l'utilisez hors ligne, il est très bien. Pour des fonctions telles que les diverses versions, le prix de LibreOffice est imbattable (bien qu'elle puisse sembler dépassée).

Q: I have bought a new laptop with Windows10 preinstalled. I have tried it and hated it. There is no control, and it installs crap I don’t want and never asked for, and what even are these sh#tty “suggestions” ? My problem is that this laptop is tiny and has one USB port, no DVD drive. How do I install Ubuntu? No dual-booting please. Wipe this crap off the face of the earth. A: If your laptop has a card reader slot, you can create a bootable disk on an SD card and install from there. I am assuming the USB port is in use. On windows, you can use Rufus to make it, and on Linux, Balena Etcher. I am not going to hold your hand through the install, but point you here: https://tutorials.ubuntu.com/tutorial/tutorial-install-ubuntu-desktop#0 Q: I have a dual-boot (windows 10 and Ubuntu 18.04) machine. I have 3 partitions, one for windows, one for Ubuntu, and one for both. I just formatted that partition as NTFS from windows, I could only see it from Ubuntu. I could not write to it. Then I formatted it using Ubuntu. After that I could read and write using Ubuntu. Then, I saved a file on it using windows. Then I was back to square one. What can I do? With best regards. A: Actually, you have many options. Shutting down windows by holding down the SHIFT key when pressing the shutdown icon. This shuts windows down and does not leave filesystems in use. (Hibernating). Turning off hibernation completely. Etc. But all the fixes are all on the Windows side.

Q : J'ai acheté un nouvel ordinateur portable sous Windows 10. Je l'ai essayé et détesté. Il n'y a aucun contrôle et il installe des trucs merdiques que je ne veux pas et que je n'ai jamais demandés, et ces suggestions à la c#n, de quoi s'agit-il ? Mon problème est que ce portable est archi petit et a un port USB et pas de lecteur DVD. Comment installer Ubuntu ? Pas de double amorçage, je vous prie. Il faut supprimer cette merde de la surface de la Terre.

R : Si votre portable a un lecteur de cartes, vous pouvez créer un disque bootable sur une carte SD et faire l'installation à partir de ça. Je suppose que le port USB est utilisé. Sous Windows, vous pouvez utiliser Rufus pour le créer et, sous Linux, Balena Etcher. Je ne vais pas vous tenir la main pendant l'installation, mais vous indiquer ceci : https://tutorials.ubuntu.com/tutorial/tutorial-install-ubuntu-desktop#0

Q : J'ai une machine en double amorçage (Windows 10 et Ubuntu 18.04. J'ai trois partitions, une pour Windows, une pour Ubuntu et une pour les deux. J'ai simplement formaté celle-là en tant que NTFS à partir de Windows, mais je peux la voir uniquement dà partir d'Ubuntu. Je ne pouvez pas écrire dessus. Ensuite, je l'ai formaté avec Ubuntu ; après, je pouvais lire et écrire avec Ubuntu. Puis j'ai sauvegardé un fichier dessus avec Windows et je dois recommencer à zéro. Que puis-je faire ? Cordialement.

R : En fait, vous avez beaucoup de possibilités : Arrêter Windows en tenant la touche MAJ pendant que vous appuez sur 'icône d'arrêt. Cela arrête Windows et ne laisse aucun système de fichiers en fonctionnement. (Mise en veille). Arrêter la mise en veille complètement. Etc. Mais tous les correctifs sont du côté de Windows.

Q: I have a failing SD card. I want to save as much as possible. I heard that Gparted has ‘attempted rescue’, and dd will make an image of the card. Which is best?

A: This time I can say neither. Can I suggest you look at photorec (not just for photos) before you clone the SD card? Recover as much with this utility before you do the other ways you have heard about, and maybe use ddrescue instead of plain dd.

Q: Is there a way for me to extract audio from a youtube video?

A: Yes! One way is to use an online converter, there are many of those, or youtube-dl, or even VLC!

Q: Hello. I switched from Ubuntu to MX to see what the fuss was about. It seems to be a storm in a teacup. I can’t seem to install any of my favourite software, it’s just not found? I can’t uninstall stuff properly as there is no software centre to uninstall stuff like flash that I don’t want. It feels like a relic from a bygone era.

A: Your question? (Switch back to Ubuntu, or try Voyager).

Q: What is this sorcery? I installed the latest iso and now my laptop won’t charge in ubuntu. It remains or runs down, never up. I tested in windows and it does charge. I don’t even know where to start looking.

A: Usually the fault is at Microsoft’s door. In Windows, discharge the battery completely and charge it full again, or do a battery calibration with the vendor software. Now boot to Ubuntu and try again. Also see if it charges when you turn the machine off. Update your machine BIOS and the Linux kernel. Uninstall TLP, if installed, and try without it.

Q: Hello friends. How can I see what is eating my bandwidth? Here in India it is a problem. I need to tell who is the problem.

A: Hi, run:

sudo apt install nethogs

and, once installed, run: sudo nethogs - IF you have more than one interface, you need to specify which one.

Q: So, after updating from Ubuntu 18.10 to 19.04, Xfce terminal can not be started from the Panel. “Failed to launch preferred application for category TerminalEmulator. Failed to execute child process /usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo-helper-1 (No such file or directory) Directory exo-1 does not exist.” This error is popping up everywhere. What went wrong?

A: I cannot say what went wrong, but I can tell you that the error tells you what is wrong. Open a terminal and type: sudo apt install libexo-1-0

Q: How can I get night light from Ubuntu Gnome to Xubuntu? The bright screen really messes with my eyes and my roommate is complaining about his sleep patterns.

A: There are two options: 1. Redshift, 2. F.lux.

Q: Desktop sounds being back is great for home, but not for work. Where can I kill it?

A: Install dconf editor then gnome > desktop > sound and make it false.

Q: I moved from Gnome to XFCE. I am a bit shaky on my feet. I see the battery indicator shows my wireless mouse battery, but it remains on 75% even when new or flat. I don’t recall this in Gnome.

A: I do not have a definitive answer for you other than the mouse’s Linux support is lacking. You can try to get a driver from the manufacturer. Consider yourself lucky, mine does not even see my mouse’s battery.

Q: I have a new PC Windows 10 64-bit, AMD Ryzen 3 2200G, with Radeon Vega 8 Graphics, 8.0 GB RAM, Motherboard MSI B350M PRO-VDH. When I installed Linux Ubuntu 18.04, all was OK, as usually in the past. When I restarted, the PC had a crash. When I installed Windows 10 Home after restart all was OK. Could you explain me why Linux is for this HW forbidden? How can I find out it in advance? In documentation of producers, I did not find it. Thanks for solving.

A: Right, nothing is forbidden, though MSI is known to be a Windows-only house. I think you can try Ubuntu 18.10 or 19.04 rather, as the problem is Ryzen CPU support. The Ubuntu 18.04 image you are booting from may be too old? Have you tried Ubuntu 18.04.2? Also, see if there is updated firmware or BIOS for that motherboard. If you would like to know in advance which hardware is Ubuntu certified, you can check out this web page: https://certification.ubuntu.com/desktop/

Q: I have installed Anki on Disco Dingo. I use it for uni. However, it’s not working. I need to get going soon.

A: You are going to have to build it from source. The version by Ubuntu is too far behind. (If you do not know how, mail me back and I can walk you through it).

Q: I have installed virtualbox and added the Ubuntu ISO file as a fake CD. It boots quite fine. Why would I need to install it?

A: Running from a live DVD / ISO is also fine. If you want to know why you cannot run it live, you can, by all means! That is one of the software freedoms you have with free software. Unless I am understanding your question wrongly.

issue155/q_r.1585573776.txt.gz · Dernière modification : 2020/03/30 15:09 de auntiee