Ventoy - the REAL solution? I have a simpler solution for the problem which was described in the Ventoy letters in FCM 187. The issue happens because Ventoy creates two partitions - one bigger exFat, and another small FAT. Older TVs are usually compatible only with FAT (maximum)/NTFS (some of them) partitions. So, to revert back the situation, we have to delete the partitions and re-create the FAT partition. This can be easily done by the “Disks” application which comes with Ubuntu installations. Step 1) Select the partition and delete it using “-” (red minus) sign. Step 2) It will ask you to confirm. Select “Delete” to proceed with it. Step 3) Repeat the same with the other partition. The Result will be free space occupying the complete USB disk. Step 4) Next click on “+” ( plus sign ) to get the “Create partition” screen as below. Step 5) Click Next in the above screen to proceed to the “Format Volume” screen. Here you can select the name of the volume. Additionally, you must change the selection to “FAT” for maximum compatibility. Step 6) The restoration is complete as shown below. Manish Raj
Ventoy - la VRAIE solution ?
J'ai une solution plus simple pour le problème qui a été décrit dans les lettres sur Ventoy dans le FCM n° 187. Le problème se produit parce que Ventoy crée deux partitions : une plus grande exFat, et une autre petite FAT. Les anciens téléviseurs ne sont généralement compatibles qu'avec des partitions FAT (un maximum)/NTFS (certains d'entre eux). Donc, pour revenir à la situation, nous devons supprimer les partitions et recréer la partition FAT. Ceci peut être facilement fait par l'application « Disques » qui est fournie avec les installations d'Ubuntu.
Étape 1. Sélectionnez la partition et supprimez-la en utilisant le signe « - » (moins rouge).
Étape 2. L'application vous demandera de confirmer. Sélectionnez « Supprimer » pour continuer.
Étape 3. Répétez l'opération avec l'autre partition. Le résultat sera un espace libre occupant la totalité du disque USB.
Étape 4. Cliquez ensuite sur « + » (signe plus) pour obtenir l'écran « Créer une partition » comme ci-dessous.
Étape 5. Cliquez sur Suivant dans l'écran ci-dessus pour passer à l'écran « Formatage du volume ». Ici, vous pouvez sélectionner le nom du volume. De plus, vous devez changer la sélection en « FAT » pour une compatibilité maximale.
Étape 6. La restauration est terminée, comme indiqué ci-dessous.
Manish Raj